Understand the best approach to how to Test a Dryer Start Switch using practical steps.
- How to Test a Dryer Start Switch.
- It's not a good feeling when you load up your dryer with soggy clothes only to have the machine not turn on when you turn the start switch.
- With the control panel released, carefully pull it out and set it on the towel.
- They simply slide off, but be sure to pull the connector off by pulling on the connector itself, NOT the wire.
- This setting is usually marked R1 or RX1 on the tester.
- If your switch featured two wires, touch one probe of your tester to each terminal.
- The tester should read infinity.
