How to Change a Thermostat on a Whirlpool Duet Dryer

  • Marcus Vance
  • Kinetic Sculpture
  • 2 min read
How to Change a Thermostat on a Whirlpool Duet Dryer

Simplify your experience with how to Change a Thermostat on a Whirlpool Duet Dryer with these practical recommendations.

{ if (sources.length) { this.parentNode.removeChild(sources[0]); } else { this.onerror = null; this.src = fallback; } })( [...this.parentNode.querySelectorAll('source')], arguments[0].target.currentSrc.replace(/\/$/, ''), '/public/images/logo-fallback.png' )" loading="lazy">
Change a Thermostat on a Whirlpool Duet Dryer

  1. Unplug the dryer and remove the two screws that secure the toe panel to the bottom front of the dryer. Pull the panel down and out to remove.

  2. Remove the screw from the bottom of the heat shield, which is located on the right side. Remove the shield.

  3. Remove the wires from the thermal cutoff and high-limit thermostat. Set your multimeter to the R x 1 scale and touch the leads to the thermal cutoff terminals to test for continuity. If you get an infinite reading, replace the cutoff and the high-limit thermostat.

  4. Remove the screws that hold the thermal cutoff and high-limit thermostat in the heater, then replace the two parts.

  5. Fasten the parts in place and reattach the wires. Put the heat shield back and replace the toe panel. Plug the dryer in and test.

Share:
Marcus Vance

Marcus Vance

Cybersecurity & Digital Privacy Researcher

Marcus Vance is a cybersecurity auditor and technology writer dedicated to educating the public about online safety, data privacy regulations, enterprise security, and emerging cyber threats.

Twitter Github Linkedin