Poor housekeeping can be a cause of incidents, such as: tripping over loose objects on floors, stairs and platforms. being hit by falling objects. slipping on greasy, wet or dirty surfaces.
Which OSHA standard covers fall protection?
The 6-foot rule. Subpart M requires the use of fall protection when construction workers are working at heights of 6 feet or greater above a lower level.
What should you do if you Cannot avoid a slick area?
If you cannot avoid walking on a wet surface, follow these tips to avoid slipping and falling:
- Slow down!
- Take small steps to keep your balance centered.
- Walk with your feet pointed slightly outward to form a stable base.
- Make wide turns at corners.
- Use handrails if present.
What can cause hazards of walking and working surfaces?
Site Safety
- Loose boards.
- Uneven floors.
- Extension cords or other cables.
- Leaks and spills.
- Protruding objects such as nails.
- Holes.
- Trash, boxes or containers.
- Loose mats or rugs.
When walking on a smooth floor you may slip or slide Why?
Explanation: When you walk on a smooth floor you may slip or slide because the floor are smooth.
What are the main causes of slips, trips, and falls?
- Uneven floor surfaces.
- Unsuitable floor coverings.
- Wet/slippery floors.
- Changes in levels.
- Trailing cables.
- Poor lighting.
- Poor housekeeping.
Here is a brief list of some of the common hazards seen frequently in working areas:
- Cords lying on the ground or other walking areas.
- Water, oil, lubricants or other liquids spilled on the ground or on elevated areas at the site.
- Materials (pallets, boxes, etc.)
- Materials stored near ladders or in machine traffic areas.
